There are many ways to optimize your HVAC system, but what we want to reference is optimizing the heating portion of your Marietta HVAC program. If your system has not been serviced in a while, call the BBB A+ rated Marietta air conditioning team from R.S. Andrews at 770-882-2757 today.
Odds are, during wintertime months, that the heater is actually on all day long trying to keep the cold out. In fact, it’s probably on more than it needs to end up being because it is not able to maintain a competent environment. Whenever troubleshooting as well as optimizing the actual heating portion of your Air conditioning system, there are many places to begin.
Brands of HVAC Systems
We service and install all the to brands of equipment, including:
- Trane
- Carrier
- Ruud
- Goodman
- Westinghouse
- Lennox
- Amana
- American Standard
- Armstrong Air and more.
Air Filter – This is the one part that you hear people talking about continuously, but so few people really take the advice and check it. If there is a blockage and or accrual of particles, you either risk not disbursing heat correctly or possibly beginning a fire. If you are not distributing the heat correctly, this means your system is working overtime. The fireplace issue is obviously self-explanatory. Neither situation is good for your wallet or your well-being. As well as, build-up of toxins (i.e. bacteria and mold), allergens (we.e. dander and pollen), as well as grime can cause the circulated atmosphere to be insufficient and harmful.
Blower – Check your blower blades as well as clean them. Again, when there is buildup of dirt/elements, your enthusiast will need to continue to work harder to blow that air out, and your system is going to be overexerting itself. What this means is strain on your HVAC program and your wallet since more gas is required to continually operate the motorized inflator.
Fire Damper – Be sure to look at your fire damper with regard to proper operation. This will make sure that risk of fireplace is decreased and that the system will work more effective.
Flex Duct — It is always possible that your ductwork have become broken throughout the year for various reasons. If a duct has collapsed or become obstructed, your system will think that the proper temperature has been reached, which will not be true. Eventually your system is going to be working tougher to keep your home cool while you continue lowering the thermostat to reach comfortable conditions.
Band Insulation — Insulation is usually overlooked, but is one of the most common reasons why your HVAC product is malfunctioning. Be sure to check your insulation and confirm that it has not become free and triggered gaps between your ductwork and also the exterior. If this has happened, your system will not reach optimum temperatures and will work extra time to attempt to support.
Air Ducts – Confirm that your ductwork has not turn out to be detached from the next area. These detachments can cause gaps within the airflow and result in a lack of heated air within your home, because it will be getting away through the gaps.
Return Air Inlets — Be sure to check that return atmosphere intakes are in perfect condition, or even your system will be unbalanced. Lots of people believe that closing an consumption will prevent the actual grill from functioning, but really you are leading to your system to become unbalanced…thus, working harder.
Zone Dampers — Check your dampers to verify that they are in the right position. Throughout the year, we might change the position of the damper for a lot of reasons (i.e. getting into a tight space or making room with regard to storage). For a properly functioning system, be sure your own damper is in the right position.